Pile Driving and Drilling Navigation System

Pile Driving and Drilling Navigation System

Improve reliability for pile driving work.


We need a more effective management method.


  • Obtain Angle of Inclination and Positional Coordinates of Piles During Its Driving Process
  • Easy to Create Real-Time Reports
  • Realize Single Inspector’s Operation for the Measurements

By replacing the reticles, total station can measure objects which it previously could not.


The Baum Station captures objects with the circles of the Baum.


It enables accurate measurement of objects which had not been previously measurable (such as cylindrical structures), which usually don't have a mark on which to aim cross-hairs, and the corners and pointed parts of structures, which the laser beam would pass through.


Mechanism

The Innovative Reticle "Baum"


The ratio of the width of each circle to the distance between the instrument and the target is 1:1000 (e.g. A space appears as 1mm at a distance of 1 meter).


The Baum Station captures objects with the circles of the Baum. It enables accurate measurement of objects which had not been previously measurable (such as cylindrical structures), which usually don’t have a mark on which to aim cross-hairs, and the corners and pointed parts of structures, which the laser beam would pass through.

In case of the entire pile width is not visible


By using vertical gauges, the angle of inclination can be measured even though the entire pile width is not visible within the lenses.

Cloud System

Connect Baum Station to Your Laptop, Smartphone or Tablet.

By connecting the dedicated transmitter, Baum Station enables to upload the data to the cloud server, and other devices can show the data in real time from remote locations.

The operator can adjust the angle of the pile while checking the data of its inclination constantly. In addition, the software can automatically create the work report from the recorded history of the driving work.

Pile Navigation System